AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller
- AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller is a single-phase hybrid controller that combines high power output with intelligent functionality, designed specifically for medium-to-large residential properties with substantial energy demands. With a rated capacity elevated to 10.2 kW and an impressive peak surge capability of 20.4 kVA, it serves as the ideal core component for powering heavy-duty loads such as central air conditioning systems and water pumps. Continuing the legacy of excellence established by the AHS series, this product features an IP54-rated design, offering effective protection against dust and moisture ingress.
- In terms of energy harvesting, the AHS-10.2 demonstrates distinct performance advantages, boasting a maximum PV input power of 10,000 W. It incorporates a dual MPPT input design—with a maximum input current of 22 A per channel—significantly enhancing the system’s compatibility with complex rooftop PV array configurations. Regarding battery charging performance, the device achieves a maximum charging current of up to 210 A when utilizing a combined grid and PV power source, thereby drastically reducing the recharge time for the energy storage system. Furthermore, it supports a dual AC output function, enabling users to flexibly prioritize power supply to primary and secondary loads based on the current battery voltage status.
Product Parameters
| MODEL | AHS-10.2 |
| Dimensions W/H/D | 480mm×410mm×120mm |
| Weight | 14.5kg |
| Ingress Protection | IP54 |
| Warranty | 5yeas |
| Operating Ambient Temperature Range | -10℃ to 55℃ |
| Storage Temperature Range | -15℃ to 60℃ |
| Relative Humidity | 5% to 95% |
| Cooling | Air-cooled by smart fans |
| Communication Interface | RS485/CAN |
| Safety and EMC Compliance | EN/IEC62109-1/-2;EN/IEC-6-1/-2/-3/-4;EN/IEC62920 |
| Max. Number of Parallel Units | 6 |
| Battery Data | |
| Battery Voltage Type | 48V |
| Fbat Charging Voltoge | 54V |
| Overcharging Protection Voltage | 60V |
| Battery Type | Lead-acid batteries/lithium batteries |
| Charging Mode | Three-stage charging(lead-acid batteries); Default charge curve or BMS communication(lithium batteries) |
| Max.DC Discharge Current | 210A |
| Max.Charge Current(from PV) | 210A |
| Max.Charge Current(from Grid) | 210A |
| Max.Charge Current | 210A |
| Ac Output Data | |
| Max.Output Apparent Power | 10200VA |
| Peak Output Apparent Power | 20400VA |
| Output Waveform | Pure sine wave |
| Nominal Output Voltage | 220VAC/230VAC/240VAC |
| Nominal Output Frequency | 50Hz/60Hz |
| Peak Efficiency (PV to Inverter) | 97.7% |
| Peak Efficiency (Battery to Inverter) | 96.1% |
| Switching Time | 5ms(UPS)20ms(APL) |
| Overload Protection | (102%<load<110%)±10%:Reports an error and turns off the output 5 minutes later. (110%<load<125%)±10%:Reports an error and turns off the output 10 seconds later. (Load>125%)±10%:Reports an error and turns off the output 5 seconds later. |
| Ac Input Data | |
| Nominal Voltage | 22OVAC/230VAC/240VAC |
| Operating Voltage Range | 170 to 280VAC(UPS)90 to 280VAC(APL) |
| Nominal Frequency | 50Hz/60Hz |
| Power Factor (Default/Adjustable) | >0.99(adjustable from 0.8 leading to 0.8 lagging) |
| Total Harmonic Distortion of Current | <3% |
| Grid Connection | Single phase |
| Max. Bypass Overload Current | 60A |
| PV Input Data | |
| Max. PV Input Power | 10000W |
| Number of MPPTs | 2 |
| Max. Input Voltage | 500VDC |
| MPPT Voltage Range | 60 to 450VDC |
| Max. PVInput Current | 22A+22A |
| MPPT Efficiency | 99.9% |
Product specifications are subject to change without further notice.
RELATED PRODUCTS
AHS-12 12kW Solar Battery Hybrid Controller
- As the flagship model of the AHS series, the AHS-12 delivers a rated output power of up to 12 kW, with a peak load capacity reaching an impressive 24 kVA—sufficient to simultaneously power a full suite of high-end household appliances. This model employs dual-loop technology to generate high-quality sine wave output and optimizes peak efficiency in battery mode to 96.1%, ensuring minimal energy loss during the conversion process.
- The AHS-12 marks a significant breakthrough in PV integration capabilities; its built-in dual MPPT controllers support a solar input power of up to 15,000 W. With a maximum PV input current increased to 27A + 27A, the unit is perfectly compatible with the high-power solar modules currently dominating the market. Designed to accommodate large-scale energy storage systems, the unit features a maximum charging current of 250A and supports parallel operation of up to six units, thereby meeting users' future requirements for power system expansion. In terms of safety, the AHS-12 integrates comprehensive protection mechanisms against short circuits, overvoltage, undervoltage, and overload, and includes a dedicated low-battery voltage input protection function.
- Featuring an IP54-rated protective design and weighing just 14.5 kg, the AHS-12—combined with a powerful interactive LCD interface and a smart cloud-based O&M platform—offers users worldwide an exceptionally reliable, efficient, and eco-friendly power solution backed by a 5-year warranty.
AHS-3.6-SP 3.6kW Split-Phase Solar Battery Hybrid Controller
- Built to withstand tough environmental conditions, this 24V Split Phase Hybrid Inverter features a rugged design, advanced cooling, and high-quality components that ensure long-term reliability, even in demanding applications.
- Designed for split-phase power systems common in North America, it delivers both 120V and 240V AC output, making it perfect for residential homes, farms, and small commercial setups that require heavy-duty appliances like air conditioners, water pumps, and kitchen equipment. With a 24V battery input, it efficiently integrates with solar panels and energy storage systems, enabling you to generate, store, and use solar power day and night.
- Its hybrid functionality allows seamless switching between solar, battery, and grid power, reducing energy costs and providing uninterrupted backup during outages. Smart energy management ensures optimal self-consumption and reduced grid dependence.
- Whether you're living off-grid, upgrading your solar system, or preparing for emergencies, this inverter delivers stable, clean power with minimal maintenance. Easy to install and compatible with a wide range of solar and battery setups, the 24V Split Phase 120/240V Hybrid Inverter is the durable, all-in-one energy solution for today’s power needs. Power smarter, live better.
AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller
- AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller has been extensively optimized for 110V/115V/120V voltage systems, fully complying with U.S. electrical standards; it represents an ideal choice for residential energy storage and small-scale commercial applications. At its core, the unit employs DSP control and dual-loop technology to deliver a stable, pure sine wave output, thereby ensuring a high-quality power supply for sensitive loads.
- In terms of performance specifications, the AHS-5-LV demonstrates exceptional energy conversion efficiency. It features a rated output power of 5.0kW, coupled with robust peak load-bearing capabilities, allowing for an instantaneous surge power of up to 10,000VA. The device incorporates a built-in, high-efficiency MPPT charge controller capable of supporting a maximum solar PV input of 6,000W; with an MPPT efficiency reaching as high as 99.9%, it ensures maximum energy harvesting across varying lighting conditions. Regarding conversion efficiency, the peak efficiency for PV-to-inverter conversion reaches 96%, while battery-to-inverter efficiency stands at an impressive 94.5%. The unit supports 48V battery systems and offers full compatibility with both lithium-ion and lead-acid batteries, featuring a lithium battery activation function as well as BMS communication capabilities via RS485 or CAN interfaces.
- Designed to withstand harsh operating environments, the AHS-5-LV features an IP54 protection rating, effectively shielding the unit against dust and moisture to significantly enhance system reliability and service life. Its intelligent air-cooling design—combined with comprehensive protection mechanisms against short circuits, overvoltage, undervoltage, and overload—provides multiple layers of safety assurance for system operation. Furthermore, to accommodate future expansions in power demand, this model supports parallel operation of up to six units, enabling users to easily construct larger-capacity power systems.
EZOG-LV IP67 US-standard Hybrid Microinverter for Storage
- EZOG-LV is a US-standard hybrid energy storage micro-inverter developed specifically for the North American market and related regions, designed for compatibility with 110V, 120V, and 127V voltage systems. As a key member of Anyu Technology’s EZOG series, it integrates advanced technologies to support highly efficient energy conversion and storage operations. Upholding the series' core design philosophy of high performance and exceptional reliability, the EZOG-LV features natural convection cooling (fanless operation) and an IP67 dust and water protection rating; this ensures extremely quiet operation while effectively safeguarding the unit against harsh weather conditions.
- In terms of technical specifications, the EZOG-LV offers a rated output capacity of 1000VA, with a peak output capability reaching 1500VA (sustained for 10 seconds). Its PV-side design offers great flexibility, featuring an MPPT voltage range of 12V–48V and a maximum continuous input current of 17A × 2. Regarding energy storage conversion efficiency, the EZOG-LV delivers outstanding performance, achieving a maximum efficiency of up to 96.2%. The device supports 51.2V low-voltage battery systems and boasts robust scalability, allowing for capacity expansion through the parallel connection of multiple battery packs. To enhance user experience, the EZOG-LV features a built-in dual-mode communication module (Wi-Fi + Bluetooth); when paired with the EMA intelligent O&M platform, it provides users with comprehensive, round-the-clock energy monitoring and management capabilities. The product features a compact design—weighing in at just 8 kg—ensuring quick and effortless installation.
SPH3.6K-24/48 3.6kW Single Phase Solar off grid inverter
- SPH3.6K-24/48 3.6kW Single Phase Solar off grid inverter is a medium-power off-grid inverter that strikes an optimal balance between power output and ease of installation. With a rated capacity upgraded to 3.6 kW and a surge capability reaching 5400 VA, it is ideally suited for off-grid residential applications with demanding power load requirements. This model not only delivers pure sine wave power but also features exceptional thermal management and robust safety mechanisms, including protection against overheating and overloading.
- Through its HMI interface—featuring a combined LED and LCD display—users can intuitively access daily and cumulative PV generation data, enabling precise monitoring and control of energy output.
- The device demonstrates outstanding PV performance, incorporating a built-in 100A charge controller that supports the connection of PV arrays up to 3600 W. Its peak efficiency reaches 96.5% in PV-to-AC conversion mode.
- Consistent with other products in the series, the SPH3.6K-24/48 supports optional WiFi/4G remote monitoring, allowing users to conveniently check the system's operational status at any time via a mobile phone or computer.
- In terms of physical design, the unit features a compact, wall-mounted form factor with dimensions of 363 × 105 × 300 mm and a weight of approximately 8.4 kg. This design not only conserves installation space but also ensures long-term reliable operation in dusty environments, thanks to its IP43 protection rating.
- Backed by the rigorous quality control standards at Anyu Technology's 47,000-square-meter intelligent manufacturing facility in Jiaxing, Zhejiang, this product offers exceptional value for money and durability.