144 Pieces of Half-Piece Mono Crystal Component Output Power is Up To 550 WP
- The 550W 144-Cell Half-Cut Monocrystalline Solar PV Module delivers a peak output power of up to 550Wp, combining proven monocrystalline cell technology with an optimized half-cut cell architecture to achieve high conversion efficiency and reliable long-term performance across a wide range of installation environments.
- Integral component by the approval of 2400pa wind load and 5400pa snow load.
- The module’s superior temperature coefficient ensures that power output degradation at elevated operating temperatures is kept to a minimum, preserving strong energy yield performance even during peak summer conditions.
- The unique circuit design reduces the hot spot temperature and reduces the power loss,and improves the power generation of the module.
- By using excellent glass and battery surface texturing technology,in order to achieve excellent environment under the low light environment.
- Guaranteeing the Eagie components of large-scale production under the condition of 60 ℃ / 85%,PID (potential) induced attenuation phenomenon caused by the attenuation rate fell to a minimum.
Product Parameters
| Type family: | RJxxxM10-144(xxx=510-550,in steps of 5W,144 cells) | |||
| Pmp [W]Tolerance of rating [%]:±3 | Voc[V] | Isc[A] | Vmp[V] | Imp[A] |
| RJ510M10-144 | 48.79 | 13.40 | 40.73 | 12.52 |
| RJ515M10-144 | 48.91 | 13.49 | 40.88 | 12.60 |
| RJ520M10-144 | 49.03 | 13.58 | 41.01 | 12.68 |
| RJ525M10-144 | 49.15 | 13.65 | 41.15 | 12.76 |
| RJ530M10-144 | 49.30 | 13.72 | 41.31 | 12.83 |
| RJ535M10-144 | 49.45 | 13.79 | 41.47 | 12.90 |
| RJ540M10-144 | 49.60 | 13.86 | 41.64 | 12.97 |
| RJ545M10-144 | 49.75 | 13.93 | 41.80 | 13.04 |
| RJ550M¹0-144 | 49.90 | 14.00 | 41.96 | 13.11 |
RELATED PRODUCTS
300W N-Type Mono Solar Panel Higher Performance & Lower Degradation for Residential/Industrial Systems
- 300W N-Type Monocrystalline Solar Panel represents a significant advancement over conventional P-Type PERC technology, delivering higher conversion efficiency, lower long-term power degradation, and enhanced reliability across both residential rooftop and industrial-scale energy systems. At the heart of this panel lies an N-Type monocrystalline silicon cell — a substrate material with inherently lower susceptibility to light-induced degradation (LID) and boron-oxygen defect formation that commonly affects P-Type cells. This fundamental material advantage translates into a first-year degradation rate of less than 1% and an annual degradation rate as low as 0.4% thereafter, ensuring the panel delivers measurably more cumulative energy over a 25-year operational lifetime compared to equivalent-rated P-Type alternatives.
- Half Cut Cell Monocrystalline PERC Solar PanelISO9001:2008, ISO14001:2004, OHSAS18001 Factorycertificates IEC61215, IEC61730 product certificates
- MULTI BUS BAR TECHNOLOGY: Improve efficiency of modules, offers better appearance.
- HALF CUT TECHNOLOGY: Under the same shadow condition, Lower power loss than full cell.
- PERC CELL TECHNOLOGY: 120N Tensile Strength Frame110% Seal-lip Design Glue Injection.
- LOW LIGHT PERFORMANCE: By high efficiency glass with surface veneering technology to Achieve excellent performance in low light conditions.
450W High-Efficiency Half-Cell Monocrystalline Solar Panel Durable for Home & Commercial Rooftop
- 450W High-Efficiency Half-Cut Monocrystalline Solar Panel is engineered to deliver exceptional power output and long-term reliability across both residential rooftop and commercial building installations. Built on advanced monocrystalline cell technology combined with a precision half-cut cell architecture, this panel achieves superior conversion efficiency and consistent energy generation performance throughout its operational lifetime. The half-cut cell design splits each cell into two independent halves, significantly reducing resistive current losses within each string, suppressing hot spot formation, and improving overall module power output — particularly under partial shading conditions commonly encountered in rooftop environments with chimneys, vents, or adjacent structures casting intermittent shadows.
- Half Cut Cell Monocrystalline PERC Solar PanelISO9001:2008, ISO14001:2004, OHSAS18001 Factorycertificates IEC61215, IEC61730 product certificates
- MULTI BUS BAR TECHNOLOGY: Improve efficiency of modules, offers better appearance.
- HALF CUT TECHNOLOGY: Under the same shadow condition, Lower power loss than full cell.
- PERC CELL TECHNOLOGY: 120N Tensile Strength Frame110% Seal-lip Design Glue Injection.
- LOW LIGHT PERFORMANCE: By high efficiency glass with surface veneering technology to Achieve excellent performance in low light conditions.
490W Foldable Solar Modules Enhancing Impact Resistance
- The 490W portable foldable solar panel is a high-performance, durable clean energy product designed for outdoor use, emergency power supply, and mobile power applications.
- Its core advantage lies in its use of monocrystalline silicon solar cells, achieving a conversion efficiency of up to 23%. This allows for stable power output even in limited light conditions, providing users with higher energy collection efficiency. This not only improves power generation performance but also effectively shortens charging time, meeting diverse power needs.
- The panel's surface is coated with a fluoropolymer material, achieving a water contact angle of 105-110 degrees and exhibiting excellent self-cleaning properties. Rainwater or a light rinse can easily remove dust and stains, significantly reducing maintenance and making outdoor use easier and more convenient.
- Furthermore, the front cover utilizes a fluoropolymer composite material with a polyester impact-resistant layer, significantly enhancing overall impact resistance, effectively resisting external pressure and impact, and providing reliable protection for the cells.
- Furthermore, the 490W foldable design makes it both lightweight and portable. It can be easily folded and stored, easily fitting into a vehicle or backpack, making it suitable for camping, travel, outdoor work, and emergency rescue operations. Its high power output combined with portability provides users with an efficient, durable and flexible green energy solution.
600W 144 Single Glass Half-chip Monocrystalline Solar Photovoltaic Module
- Multi-busbar TOPCon (MBB)10 busbar cells are used. Fully upgraded to 10 or 16 busbar cells, with stronger current collection capability and more stable power output.
- The half-cut cell circuit configuration effectively reduces hot spot temperatures and resistive power losses within each cell string, directly improving overall module power generation performance and extending long-term component reliability. With a power temperature coefficient of only -0.32%/K, the module maintains superior output stability at high operating temperatures, making it well-suited for hot-climate and high-irradiance installations.
- Structurally, the module is certified to withstand wind loads of 2,400 Pa and snow loads of 5,400 Pa, ensuring dependable performance in demanding environmental conditions including coastal, high-altitude, and heavy-snowfall regions.
- Relative conversion efficiency≥97% under 200W/m2 low light, Lower sealing loss, more suitable for high-efficiency modules.
- The authoritative test of anti-PID (potential-induced degradation) under severe conditions (85°C/85%RH, 96 hours), the probability of degradation caused by the PID phenomenon is minimized.
620W 144 Pieces of Double Glass Half-piece Monocrystalline Solar Photovoltaic Module
- Built for the demands of modern utility-scale and commercial solar installations, the 620W Double Glass Half-Cut Monocrystalline PV Module combines cutting-edge TOPCon cell technology with robust structural engineering to deliver outstanding power output and long-term reliability in a single, high-performance package.
- At the core of this module lies a fully upgraded Multi-Busbar TOPCon (MBB) cell design featuring 10 to 16 busbars per cell. Compared to conventional busbar configurations, this architecture significantly improves current collection across the cell surface, reduces internal resistive losses, and ensures a more consistent and stable power output across the full service life of the module — even under variable irradiance conditions.
- Integral component by the approval of 2400pa wind load and 5400pa snow load.
- Power temperature coefficient as low as -0.32%/K.
- The unique circuit design reduces the hot spot temperature and reduces the power loss, and improves the power generation of the module.
- Relative conversion efficiency≥97% under 200W/m2 low light, Lower sealing loss, more suitable for high-efficiency modules.
- The authoritative test of anti-PID (potential-induced degradation) under severe conditions (85°C/85%RH, 96 hours), the probability of degradation caused by the PID phenomenon is minimized.