620W 144 Pieces of Double Glass Half-piece Monocrystalline Solar Photovoltaic Module
- Built for the demands of modern utility-scale and commercial solar installations, the 620W Double Glass Half-Cut Monocrystalline PV Module combines cutting-edge TOPCon cell technology with robust structural engineering to deliver outstanding power output and long-term reliability in a single, high-performance package.
- At the core of this module lies a fully upgraded Multi-Busbar TOPCon (MBB) cell design featuring 10 to 16 busbars per cell. Compared to conventional busbar configurations, this architecture significantly improves current collection across the cell surface, reduces internal resistive losses, and ensures a more consistent and stable power output across the full service life of the module — even under variable irradiance conditions.
- Integral component by the approval of 2400pa wind load and 5400pa snow load.
- Power temperature coefficient as low as -0.32%/K.
- The unique circuit design reduces the hot spot temperature and reduces the power loss, and improves the power generation of the module.
- Relative conversion efficiency≥97% under 200W/m2 low light, Lower sealing loss, more suitable for high-efficiency modules.
- The authoritative test of anti-PID (potential-induced degradation) under severe conditions (85°C/85%RH, 96 hours), the probability of degradation caused by the PID phenomenon is minimized.
Product Parameters
| Type family: | RJxxxM10-144(xxx=555-620,in steps of 5W,144 cells) | |||||
| Pmp [W] Tolerance of rating [%]:±3 |
Voc[V] | Isc[A] | Vmp[V] | Imp[A] | Pmax[W] | Efficiency% |
| RJ555SM10-144 | 50.26 | 13.46 | 43.09 | 12.88 | 555 | 20.5 |
| RJ560SM10-144 | 50.49 | 13.52 | 43.25 | 12.95 | 560 | 20.7 |
| RJ565SM10-144 | 50.64 | 13.59 | 43.37 | 13.03 | 565 | 20.9 |
| RJ570SM10-144 | 50.76 | 13.67 | 43.49 | 13.11 | 570 | 21.1 |
| RJ575SM10-144 | 50.89 | 13.74 | 43.63 | 13.18 | 575 | 21.3 |
| RJ580SM10-144 | 51.00 | 13.83 | 43.74 | 13.26 | 580 | 21.5 |
| RJ585SM10-144 | 51.17 | 13.91 | 43.85 | 13.34 | 585 | 21.7 |
| RJ590SM10-144 | 51.23 | 13.99 | 43.97 | 13.42 | 590 | 21.9 |
| RJ595SM10-144 | 51.35 | 14.08 | 44.08 | 13.50 | 595 | 22.1 |
| RJ60OSM10-144 | 51.49 | 14.15 | 44.22 | 13.57 | 600 | 22.3 |
| RJ605SM10-144 | 51.62 | 14.22 | 44.35 | 13.64 | 605 | 22.5 |
| RJ610SM10-144 | 51.68 | 14.33 | 44.41 | 13.74 | 610 | 22.7 |
| RJ615SM10-144 | 51.75 | 14.42 | 44.47 | 13.83 | 615 | 22.9 |
| RJ62OSM10-144 | 51.81 | 14.52 | 44.50 | 13.93 | 620 | 23.1 |
RELATED PRODUCTS
144 Cells (Half Cell )Double Glass Mono Solar Panel, Maximum Power Can Reach 550wp
- 144 cells (half cell )double glass Mono solar panel, maximum power can reach 550wp.
- Engineered for structural resilience, the module has been certified to withstand wind loads of 2,400 Pa and snow loads of 5,400 Pa, making it a dependable choice for installations in high-wind, high-altitude, and heavy-snowfall regions.
- Better the temperature coefficient of components under high temperature power attenuation less.
- The innovative half-cut cell circuit design effectively suppresses hot spot formation and reduces resistive power losses within each cell string, resulting in improved overall module efficiency and extended component service life. Advanced glass processing and precision cell surface texturing technology work in combination to maximize light absorption and deliver excellent power generation performance under low irradiance conditions, capturing more energy during cloudy periods and shoulder hours of the solar day.
- Guaranteeing the Eagie components of large-scale production under the condition of 60 ℃ / 85%,PID (potential) induced attenuation phenomenon caused by the attenuation rate fell to a minimum.
144 Pieces of Half-Piece Mono Crystal Component Output Power is Up To 550 WP
- The 550W 144-Cell Half-Cut Monocrystalline Solar PV Module delivers a peak output power of up to 550Wp, combining proven monocrystalline cell technology with an optimized half-cut cell architecture to achieve high conversion efficiency and reliable long-term performance across a wide range of installation environments.
- Integral component by the approval of 2400pa wind load and 5400pa snow load.
- The module's superior temperature coefficient ensures that power output degradation at elevated operating temperatures is kept to a minimum, preserving strong energy yield performance even during peak summer conditions.
- The unique circuit design reduces the hot spot temperature and reduces the power loss,and improves the power generation of the module.
- By using excellent glass and battery surface texturing technology,in order to achieve excellent environment under the low light environment.
- Guaranteeing the Eagie components of large-scale production under the condition of 60 ℃ / 85%,PID (potential) induced attenuation phenomenon caused by the attenuation rate fell to a minimum.
300W N-Type Mono Solar Panel Higher Performance & Lower Degradation for Residential/Industrial Systems
- 300W N-Type Monocrystalline Solar Panel represents a significant advancement over conventional P-Type PERC technology, delivering higher conversion efficiency, lower long-term power degradation, and enhanced reliability across both residential rooftop and industrial-scale energy systems. At the heart of this panel lies an N-Type monocrystalline silicon cell — a substrate material with inherently lower susceptibility to light-induced degradation (LID) and boron-oxygen defect formation that commonly affects P-Type cells. This fundamental material advantage translates into a first-year degradation rate of less than 1% and an annual degradation rate as low as 0.4% thereafter, ensuring the panel delivers measurably more cumulative energy over a 25-year operational lifetime compared to equivalent-rated P-Type alternatives.
- Half Cut Cell Monocrystalline PERC Solar PanelISO9001:2008, ISO14001:2004, OHSAS18001 Factorycertificates IEC61215, IEC61730 product certificates
- MULTI BUS BAR TECHNOLOGY: Improve efficiency of modules, offers better appearance.
- HALF CUT TECHNOLOGY: Under the same shadow condition, Lower power loss than full cell.
- PERC CELL TECHNOLOGY: 120N Tensile Strength Frame110% Seal-lip Design Glue Injection.
- LOW LIGHT PERFORMANCE: By high efficiency glass with surface veneering technology to Achieve excellent performance in low light conditions.
520W Flexible Lightweight Solar Panel for RV, Boat & Off-Grid Use Bendable & Easy Install
- Unmatched High-Power Flexibility With a remarkable 520W output, this panel delivers high energy yield while maintaining a truly flexible and bendable form factor, allowing seamless installation on curved or irregular surfaces like RV roofs and boat decks.
- Ultra-Lightweight & Easy Installation Its lightweight design significantly reduces structural load and simplifies the mounting process, enabling quick and tool-free DIY setups for diverse applications from residential balconies to mobile setups.
- Durable & Versatile All-Weather Performance Built with robust, weather-resistant materials, it ensures long-term reliability and stable power generation across various demanding environments and mobile applications, from marine use to road travel.
580W 144 Single Glass Half-chip Monocrystalline Solar Photovoltaic Module
- Multi-busbar TOPCon (MBB) 10 busbar cells are used. Fully upgraded to 10 or 16 busbar cells, with stronger current collection capability and more stable power output.
- The unique circuit design reduces the hot spot temperature and reduces the power loss,and improves the power generation of the module. Under low irradiance of 200 W/m², relative conversion efficiency remains at or above 97%, maximizing energy harvest during early morning, late afternoon, and overcast periods.
- Anti-PID performance has been validated under rigorous test conditions of 85°C and 85% relative humidity over 96 continuous hours, confirming minimal susceptibility to potential-induced degradation and ensuring stable long-term system output.