HCC01-SM-0080H-EP-D High Safety Single Phase Hybrid Inverter
- 1. Colorful touch LCD, lP66 protection degree, Max. 16 pcs parallel for on-grid and off-grid operation.
- 2. Ac coupling to retrofit existing solar system, support multiple batteries parallel.
- 3. Max.charging/discharging current of 190A, 6 time periods for battery charging/discharging.
- 4. Support storing energy from diesel generator.
Product Parameters
 |
 |
 |
| Colorful touch LCD, Ip66 protection degree | Ac coupling to retrofit existing solar system | Max. 16 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel |
 |
 |
 |
| Max. charging/discharging current of 135A | 6 time periods for battery charging/discharging | Support storing energy from diesel generator |
Certifications
Product Characteristics
Lcd Display Icons
Basic System Architecture
Data Sheet
| Model | HCC01-SM-0080H-EP-D |
| PV String Input Data | |
| Max.DC Input Power(W) | 10400 |
| Rated PV Input Voltage(V) | 370(125~500) |
| Start-up Voltage (V) | 125 |
| MPPT Voltage Range(V) | 150-425 |
| Full Load MPPT Voltage Range(V) | 200-425 |
| PV Input Current(A) | 20+20 |
| Max.DC Short Circuit Current(A) | 44+44 |
| No.of MPPT Trackers | 2 |
| No.of Strings per MPPT Tracker | 1+1 |
| AC Input/Output Data | |
| Rated AC Output Power(W) | 8000 |
| MaxAC Output Power(W) | 8800 |
| AC Input/Output Rated Current(A) | 36.4/34.8 |
| Max.AC Input/Output Current(A) | 40/38.3 |
| Max Continuous AC Passthrough(A) | 50 |
| Peak Power (off grid) | 2 times of rated power,10 S |
| Power Factor | 0.8 leading-0.8lagging |
| AC Output Frequency and Voltage | 50/60Hz;220/230Vac |
| Grid Type | Single Phase |
| Total Harmonic Distortion (THDi) | <3%(of nominal power) |
| DC Current Injection | <0.5%(Rated Current) |
| Battery Input Data | |
| Battery Type | Lead-acid or Lithium-ion |
| Battery Voltage Range (V) | 40~60 |
| Max.Charging Current(A) | 190 |
| Max.Discharging Current(A) | 190 |
| External Temperature Sensor | Yes |
| Charging Curve | 3 Stages /Equalization |
| Charging Strategy for Li-lon Battery | Self-adaption to BMS |
| Efficiency | |
| Max.Efficiency | 97.60% |
| Euro Efficiency | 96.50% |
| MPPT Efficiency | 99% |
| Protection | |
| Anti-islanding Protection | Yes |
| PV String Input Reverse Polarity Protection | Yes |
| Insulation Resistor Detection | Yes |
| Residual Current Monitoring Unit | Yes |
| Output Over Current Protection | Yes |
| Output Shorted Protection | Yes |
| Surge Protection | DC Type l/AC TypeIll |
| Over Voltage Category | DC Typel/AC TypeⅢ |
| Certifications and Standards | |
| Grid Regulation | IEC61727/IEC 62116,EN 50549-1 |
| Safety EMC/Standard | IEC/EN 61000-6-1/2/3/4,IEC/EN62109-1,IEC/EN62109-2 |
| General Data | |
| Operating Temperature Range(℃) | -40-60℃,>45℃ Derating |
| Cooling | Smart Cooling |
| Noise(dB) | ≤50 dB |
| Communication with BMS | RS485;CAN |
| Monitoring mode | WIFI, APP |
| Weight(kg) | 29 |
| Size(W×HxDmm) | 420Wx640Hx264D(Excluding connectors and brackets) |
| Protection Degree | IP66 |
| Installation Style | Wall-mounted |
| Warranty | 5Years(10Years Optional) |
RELATED PRODUCTS
AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller
- AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller is a single-phase hybrid controller that combines high power output with intelligent functionality, designed specifically for medium-to-large residential properties with substantial energy demands. With a rated capacity elevated to 10.2 kW and an impressive peak surge capability of 20.4 kVA, it serves as the ideal core component for powering heavy-duty loads such as central air conditioning systems and water pumps. Continuing the legacy of excellence established by the AHS series, this product features an IP54-rated design, offering effective protection against dust and moisture ingress.
- In terms of energy harvesting, the AHS-10.2 demonstrates distinct performance advantages, boasting a maximum PV input power of 10,000 W. It incorporates a dual MPPT input design—with a maximum input current of 22 A per channel—significantly enhancing the system's compatibility with complex rooftop PV array configurations. Regarding battery charging performance, the device achieves a maximum charging current of up to 210 A when utilizing a combined grid and PV power source, thereby drastically reducing the recharge time for the energy storage system. Furthermore, it supports a dual AC output function, enabling users to flexibly prioritize power supply to primary and secondary loads based on the current battery voltage status.
AHS-12-SP 12kW Split-Phase Solar Battery Hybrid Controller
- AHS-12-SP 12kW Split-Phase Solar Battery Hybrid Controller delivers a premium energy management experience for large residential properties and commercial environments with high power demands. This model boasts an impressive rated output power of 12,000 VA (12 kW) and a momentary peak power capacity of up to 24,000 VA—sufficient to simultaneously power a full suite of high-end household appliances. It supports split-phase output modes (110/220 VAC or 120/240 VAC), generating high-quality pure sine wave current that provides a grid-stable power environment for sensitive electronic equipment.
- The AHS-12-SP represents a significant breakthrough in photovoltaic integration capabilities. It features a dual MPPT input design capable of accommodating up to 15,000 W of solar panels; with a maximum input current increased to 27A + 27A per channel, it is fully compatible with high-power PV modules. For large-scale energy storage applications, the unit offers a maximum charging current of 250A and supports parallel operation of up to six units, greatly enhancing system scalability and flexibility. Operating in battery mode, the device achieves a peak efficiency of 96.1%, ensuring minimal energy loss during the power conversion process.
- In terms of physical specifications, the unit measures 480 × 410 × 120 mm and weighs 14.5 kg, offering an exceptionally high power density relative to other products in its class. This model integrates comprehensive safety protection mechanisms, holds an IP54 protection rating, and supports remote intelligent monitoring and maintenance via Wi-Fi.
AHS-6.3 6.3kW Solar Battery Hybrid Controller
- AHS-6.3 6.3kW Solar Battery Hybrid Controller is an intelligent hybrid power controller designed to provide modern households with efficient solutions for both off-grid and on-grid energy storage management. As the foundational model of the AHS series, it features a rated capacity of 6.3 kW and a peak output power of up to 12.6 kVA, enabling it to effortlessly handle household appliances with high startup current requirements. The device employs advanced DSP control and dual-loop technology to deliver a pure sine wave output, thereby ensuring the electrical safety of sensitive electronic equipment.
- Regarding PV integration, the AHS-6.3 is equipped with a high-performance MPPT controller that supports a maximum PV input power of 6500 W, boasting an MPPT efficiency of up to 99.9%. Its MPPT operating voltage range spans 60–450 VDC, with a maximum input current of 22 A. In terms of battery management, the unit offers seamless compatibility with both lithium-ion and lead-acid batteries; it also features a lithium battery activation function and supports BMS communication via RS485 or CAN interfaces.
- Furthermore, this model holds an IP54 protection rating and incorporates an intelligent air-cooling design, significantly enhancing its reliability and operational lifespan within challenging environments. Users can configure power supply priority modes—selecting between PV, utility grid, or battery sources—via the integrated LCD screen, and utilize a dedicated mobile app for 24-hour intelligent energy monitoring. The product weighs 12.8 kg, measures 380 × 576 × 141 mm, and is backed by a 5-year manufacturer's warranty.
APS6500 Pro-48 1.2kW Single Phase Off-Grid Inverter
- APS6500 Pro-48 1.2kW Single-Phase Off-Grid Inverter is a "Professional Edition" single-phase off-grid inverter that builds upon the standard version by significantly enhancing connectivity flexibility and system integration capabilities. While its core power performance remains identical to the standard model—boasting a rated capacity of 6.5kW and a momentary peak power of 13kVA—the "Pro" series introduces a suite of advanced, industrial-grade features.
- The most distinctive characteristic of this model is its support for "Dual AC Inputs" and "Dual AC Outputs." This functionality enables the system to connect simultaneously to both the utility grid and a generator, intelligently switching the power source for the load based on pre-configured priorities. Furthermore, it supports Meter/CT connectivity and automatic transfer switch (ATS) control for generators, thereby vastly elevating the level of automation in energy management.
- In terms of hardware configuration, the APS6500 Pro-48 features the same robust built-in 120A MPPT charge controller, supporting a maximum PV open-circuit voltage of 520V and a solar input capacity of 9000W. This ensures exceptionally high charging efficiency, even under challenging lighting conditions. The device employs DSP control and dual-loop technology to deliver a stable, pure sine wave output, achieving an exceptionally high power density relative to other products in its power class. In addition to supporting lithium battery activation and offering a comprehensive array of interfaces—including RS232, USB, and RS485—it provides real-time cloud-based monitoring services via built-in Wi-Fi. With its superior hardware-software integration capabilities and a 2-year warranty commitment, the APS6500 Pro-48 stands as a premier choice for constructing high-end off-grid microgrid systems.
TP Pro Series High-Efficiency Three Phase Solar GTI
- The TP Pro Series High-Efficiency Three Phase Solar GTI is designed to deliver optimal performance for both residential and commercial solar systems. With cutting-edge technology and exceptional efficiency, this inverter maximizes energy conversion, ensuring that every bit of sunlight is harnessed to its full potential.
- One of the standout features of the TP Pro Series is its high conversion efficiency, allowing it to operate at peak levels even under fluctuating environmental conditions. It ensures more power generation and savings on energy bills, making it an eco-friendly and cost-effective solution.
- The inverter is also highly durable, built to withstand harsh weather conditions and offer long-lasting performance. Remote monitoring capabilities provide real-time insights into energy production, enabling users to track performance and troubleshoot remotely, ensuring peace of mind. Its three-phase capability enhances grid stability, making it ideal for larger-scale installations that require consistent, high-power output.