SPH10.2K-48-SP 10.2KW Split-Phase Olar Off Grid Inverter
- SPH10.2K-48-SP is a flagship split-phase off-grid inverter that seamlessly integrates ultra-high capacity with intelligent management capabilities. With a rated capacity elevated to 10.2 kW and an impressive instantaneous peak power of 14 kVA, it serves as the central hub for constructing large-scale off-grid microgrid systems. This device supports both 120 Vac single-phase and 240 Vac split-phase outputs; utilizing an advanced power electronics architecture, it achieves a peak efficiency of 97.0% in PV-to-AC mode and a conversion efficiency of up to 94.0% in battery mode—performance metrics that represent an industry-leading standard.
- In terms of energy dispatch, the SPH10.2K-48-SP delivers exceptional performance. It features a built-in high-power charge controller with a maximum PV charging current of up to 200 A, significantly optimizing the recharge speed for large-scale energy storage systems. This model is specifically equipped with dual AC outputs, grid feed-in capabilities, intelligent fan cooling, IP43 dust protection, and comprehensive support for 51.2 V low-voltage battery systems.
Product Parameters
| MODEL | SPH10.2K-48-SP |
| PV Array | |
| Max. PV Array Power | 5400W+5400W |
| Max. PV Array Open-Circuit Voltage | 500VDC |
| Start-up Voltage | 100VDC |
| MPPT Operating Voltage Range | 120-450VDC |
| Nominal Input Voltage | 360VDC |
| Max. Input Current MPPT | 18A*2 |
| MPPT max Efficiency | 99% |
| Battery | |
| Battery Type | Li-ion/Lead-acid |
| Nominal Battery Voltage | 48V |
| Battery Voltage Range | 41-58V |
| Max.AC Charging Current | 70A |
| Max.PV Charging Current | 160A |
| Max.Continuous Discharging Current | 200A |
| AC Input | |
| Nominal Voltage | 120Vac±5%/240Vac±5% |
| Voltage Range | 170-275VAC |
| Frequency | 50/60Hz(Auto following) |
| Max. Input Current | 50A |
| AC Two-Load Output | |
| Nominal Voltage | 120Vac±5%/240Vac±5% |
| Output Voltage Waveform | Pure Sine Wave |
| Full Load | 10200VA |
| Max.Main Load | 10200VA |
| Max.2nd Load | 10200VA |
| Max.Load Cut Off Voltage (battery mode) | 54VDC(adjustable) |
| Max.Load Return Voltage (battery mode) | 54V DC(adjustable) |
| Peak Output Power | 14000VA |
| Nominal Output Frequency | 50/60Hz |
| Transfer Time | 10ms |
| Efficiency (peak)PV to INV | 97.0% |
| Efficiency (peak)BAT to INV | 94.0% |
| General Data | |
| Operating Temperature Range | -10–+50℃ |
| Relative Humidity | 0~95% |
| Max.Operating Attitude | <4000m |
| Cooling Method | Intelligent Fan cooling |
| Display | LED+LCD |
| Communication with BMS | RS485 |
| Communication with Cloud | WIF/4G |
| Degree of Protection | IP43 |
| Waranty | 2 years |
| Weight(kg) | 11.5 |
| Dimension(W*H*Dmm) | 389*105*310 |
| Mounting Method | Wall Mounted |
Product specifications are subject to change without further notice.
RELATED PRODUCTS
AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller
- AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller is a single-phase hybrid controller that combines high power output with intelligent functionality, designed specifically for medium-to-large residential properties with substantial energy demands. With a rated capacity elevated to 10.2 kW and an impressive peak surge capability of 20.4 kVA, it serves as the ideal core component for powering heavy-duty loads such as central air conditioning systems and water pumps. Continuing the legacy of excellence established by the AHS series, this product features an IP54-rated design, offering effective protection against dust and moisture ingress.
- In terms of energy harvesting, the AHS-10.2 demonstrates distinct performance advantages, boasting a maximum PV input power of 10,000 W. It incorporates a dual MPPT input design—with a maximum input current of 22 A per channel—significantly enhancing the system's compatibility with complex rooftop PV array configurations. Regarding battery charging performance, the device achieves a maximum charging current of up to 210 A when utilizing a combined grid and PV power source, thereby drastically reducing the recharge time for the energy storage system. Furthermore, it supports a dual AC output function, enabling users to flexibly prioritize power supply to primary and secondary loads based on the current battery voltage status.
AHS-12 12kW Solar Battery Hybrid Controller
- As the flagship model of the AHS series, the AHS-12 delivers a rated output power of up to 12 kW, with a peak load capacity reaching an impressive 24 kVA—sufficient to simultaneously power a full suite of high-end household appliances. This model employs dual-loop technology to generate high-quality sine wave output and optimizes peak efficiency in battery mode to 96.1%, ensuring minimal energy loss during the conversion process.
- The AHS-12 marks a significant breakthrough in PV integration capabilities; its built-in dual MPPT controllers support a solar input power of up to 15,000 W. With a maximum PV input current increased to 27A + 27A, the unit is perfectly compatible with the high-power solar modules currently dominating the market. Designed to accommodate large-scale energy storage systems, the unit features a maximum charging current of 250A and supports parallel operation of up to six units, thereby meeting users' future requirements for power system expansion. In terms of safety, the AHS-12 integrates comprehensive protection mechanisms against short circuits, overvoltage, undervoltage, and overload, and includes a dedicated low-battery voltage input protection function.
- Featuring an IP54-rated protective design and weighing just 14.5 kg, the AHS-12—combined with a powerful interactive LCD interface and a smart cloud-based O&M platform—offers users worldwide an exceptionally reliable, efficient, and eco-friendly power solution backed by a 5-year warranty.
HCC04-SM-0060H-YP High Efficiency Single Phase Hybrid Inverter
- 1. Colorful touch LCD, IP66 protection degree, 6 time periods for battery charging/discharging.
- 2. Max.16 pcs parallel for on-grid and off-grid operation, Support mutiple batteries parallel.
- 3. Support storing energy from diesel generator, Ac coupling to retrofit existing solar system.
- Single-phase output, suitable for household electricity use.
- Provides stable single-phase power output, ideal for homes, villas, small offices, etc.
- Can directly replace traditional grid power, enabling seamless integration of household solar power generation and energy storage systems.
HCC05-SM-0060/0080H-EP High Compatibility Single Phase Hybrid Inverter
- 1. Colorful touch LCD, IP66 protection degree, 6 time periods for battery charging/discharging.
- 2. Max.16 pcs parallel for on-grid and off-grid operation, Support mutiple batteries parallel.
- 3. Support storing energy from diesel generator, Ac coupling to retrofit existing solar system.
- Hybrid design, flexible energy utilization.
- Supports photovoltaic power generation, battery energy storage, and grid complementarity.
- The system can intelligently schedule energy: prioritizing solar power during the day, and using battery storage to handle nighttime or power outages, reducing electricity costs.