SPH8.5K-48-SP 8.5KW Split-Phase Olar Off Grid Inverter
- SPH8.5K-48-SP 8.5kW Split-Phase olar off grid inverter is a high-power, split-phase off-grid inverter developed by APsolway. Tailored specifically for 120/240V±5% power systems, it is perfectly designed to meet the high-load electricity demands of North America and related regions. Its pure sine wave output delivers power quality comparable to that of the utility grid, effectively safeguarding the safe operation of sensitive electronic equipment.
- In terms of PV performance, the SPH8.5K-48-SP features an advanced dual-MPPT input design, supporting a maximum PV array input of 5400W + 5400W (totaling 10.8kW) with an MPPT efficiency reaching up to 99%. Its wide MPPT operating voltage range (120–450 VDC) and a maximum open-circuit voltage of 500 VDC significantly enhance the system’s energy harvesting efficiency.
- A key highlight of this model is its support for battery-free operation, allowing loads to be powered directly by solar energy when sunlight is sufficient. Furthermore, the device features a built-in dust-proof kit designed to withstand harsh environments, and it supports remote smart monitoring via Wi-Fi or 4G connectivity. This product is fully compatible with both lithium-ion and lead-acid batteries, supporting BMS communication and automatic activation for lithium batteries.
Product Parameters
| MODEL | SPH8.5K-48-SP |
| PV Array | |
| Max. PV Array Power | 5400W+5400W |
| Max. PV Array Open-Circuit Voltage | 500VDC |
| Start-up Voltage | 100VDC |
| MPPT Operating Voltage Range | 120-450VDC |
| Nominal Input Voltage | 360VDC |
| Max. Input Current MPPT | 18A*2 |
| MPPT max Efficiency | 99% |
| Battery | |
| Battery Type | Li-ion/Lead-acid |
| Nominal Battery Voltage | 48V |
| Battery Voltage Range | 41-58V |
| Max.AC Charging Current | 70A |
| Max.PV Charging Current | 160A |
| Max.Continuous Discharging Current | 180A |
| AC Input | |
| Nominal Voltage | 120Vac±5%/240Vac±5% |
| Voltage Range | 170-275VAC |
| Frequency | 50/60Hz(Auto following) |
| Max. Input Current | 40A |
| AC Two-Load Output | |
| Nominal Voltage | 120Vac±5%/240Vac±5% |
| Output Voltage Waveform | Pure Sine Wave |
| Full Load | 8500VA |
| Max.Main Load | 8500VA |
| Max.2nd Load | 8500VA |
| Max.Load Cut Off Voltage (battery mode) | 54VDC(adjustable) |
| Max.Load Return Voltage (battery mode) | 54V DC(adjustable) |
| Peak Output Power | 1000VA |
| Nominal Output Frequency | 50/60Hz |
| Transfer Time | 10ms |
| Efficiency (peak)PV to INV | 97.0% |
| Efficiency (peak)BAT to INV | 94.0% |
| General Data | |
| Operating Temperature Range | -10–+50℃ |
| Relative Humidity | 0~95% |
| Max.Operating Attitude | <4000m |
| Cooling Method | Intelligent Fan cooling |
| Display | LED+LCD |
| Communication with BMS | RS485 |
| Communication with Cloud | WIF/4G |
| Degree of Protection | IP43 |
| Waranty | 2 years |
| Weight(kg) | 11 |
| Dimension(W*H*Dmm) | 389*105*310 |
| Mounting Method | Wall Mounted |
Product specifications are subject to change without further notice.
RELATED PRODUCTS
AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller
- AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller is a single-phase hybrid controller that combines high power output with intelligent functionality, designed specifically for medium-to-large residential properties with substantial energy demands. With a rated capacity elevated to 10.2 kW and an impressive peak surge capability of 20.4 kVA, it serves as the ideal core component for powering heavy-duty loads such as central air conditioning systems and water pumps. Continuing the legacy of excellence established by the AHS series, this product features an IP54-rated design, offering effective protection against dust and moisture ingress.
- In terms of energy harvesting, the AHS-10.2 demonstrates distinct performance advantages, boasting a maximum PV input power of 10,000 W. It incorporates a dual MPPT input design—with a maximum input current of 22 A per channel—significantly enhancing the system's compatibility with complex rooftop PV array configurations. Regarding battery charging performance, the device achieves a maximum charging current of up to 210 A when utilizing a combined grid and PV power source, thereby drastically reducing the recharge time for the energy storage system. Furthermore, it supports a dual AC output function, enabling users to flexibly prioritize power supply to primary and secondary loads based on the current battery voltage status.
AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller
- AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller has been extensively optimized for 110V/115V/120V voltage systems, fully complying with U.S. electrical standards; it represents an ideal choice for residential energy storage and small-scale commercial applications. At its core, the unit employs DSP control and dual-loop technology to deliver a stable, pure sine wave output, thereby ensuring a high-quality power supply for sensitive loads.
- In terms of performance specifications, the AHS-5-LV demonstrates exceptional energy conversion efficiency. It features a rated output power of 5.0kW, coupled with robust peak load-bearing capabilities, allowing for an instantaneous surge power of up to 10,000VA. The device incorporates a built-in, high-efficiency MPPT charge controller capable of supporting a maximum solar PV input of 6,000W; with an MPPT efficiency reaching as high as 99.9%, it ensures maximum energy harvesting across varying lighting conditions. Regarding conversion efficiency, the peak efficiency for PV-to-inverter conversion reaches 96%, while battery-to-inverter efficiency stands at an impressive 94.5%. The unit supports 48V battery systems and offers full compatibility with both lithium-ion and lead-acid batteries, featuring a lithium battery activation function as well as BMS communication capabilities via RS485 or CAN interfaces.
- Designed to withstand harsh operating environments, the AHS-5-LV features an IP54 protection rating, effectively shielding the unit against dust and moisture to significantly enhance system reliability and service life. Its intelligent air-cooling design—combined with comprehensive protection mechanisms against short circuits, overvoltage, undervoltage, and overload—provides multiple layers of safety assurance for system operation. Furthermore, to accommodate future expansions in power demand, this model supports parallel operation of up to six units, enabling users to easily construct larger-capacity power systems.
EZOG IP67 Single-phase Hybrid Microinverter for Storage
- EZOG is a single-phase hybrid energy storage micro-inverter, specifically designed for 220V, 230V, and 240V voltage systems. A key technical highlight of this product is its integrated GaN (Gallium Nitride) chip, which enables it to support continuous fast charging at 40A, thereby significantly enhancing energy processing efficiency. Featuring a fanless design, the EZOG ensures ultra-quiet operation; combined with its system-wide IP67 protection rating, it is suitable for installation in a wide range of harsh outdoor environments—including AC-coupled applications for balcony-based micro-inverter systems.
- In terms of performance specifications, the EZOG boasts a rated output power of 1200VA, with a peak output power reaching 1800VA within 10 seconds, ensuring excellent adaptability to load fluctuations. The PV input terminal is recommended for connection with modules ranging from 430Wp to 900Wp+, operating within an MPPT voltage range of 12V to 48V. The inverter supports 51.2V low-voltage battery inputs, featuring a maximum charging current of 40A and a peak discharge efficiency of up to 95.5%. Furthermore, the EZOG integrates a 24-hour intelligent energy management system, allowing users to utilize the built-in Wi-Fi and Bluetooth capabilities—via the AP EasyPower App—for convenient remote operation, maintenance, and real-time monitoring. With its compact dimensions and a weight of just 8kg, backed by a 5-year manufacturer's warranty, the EZOG represents an ideal choice for building intelligent, miniaturized home energy storage systems.
EZOG-LV IP67 US-standard Hybrid Microinverter for Storage
- EZOG-LV is a US-standard hybrid energy storage micro-inverter developed specifically for the North American market and related regions, designed for compatibility with 110V, 120V, and 127V voltage systems. As a key member of Anyu Technology’s EZOG series, it integrates advanced technologies to support highly efficient energy conversion and storage operations. Upholding the series' core design philosophy of high performance and exceptional reliability, the EZOG-LV features natural convection cooling (fanless operation) and an IP67 dust and water protection rating; this ensures extremely quiet operation while effectively safeguarding the unit against harsh weather conditions.
- In terms of technical specifications, the EZOG-LV offers a rated output capacity of 1000VA, with a peak output capability reaching 1500VA (sustained for 10 seconds). Its PV-side design offers great flexibility, featuring an MPPT voltage range of 12V–48V and a maximum continuous input current of 17A × 2. Regarding energy storage conversion efficiency, the EZOG-LV delivers outstanding performance, achieving a maximum efficiency of up to 96.2%. The device supports 51.2V low-voltage battery systems and boasts robust scalability, allowing for capacity expansion through the parallel connection of multiple battery packs. To enhance user experience, the EZOG-LV features a built-in dual-mode communication module (Wi-Fi + Bluetooth); when paired with the EMA intelligent O&M platform, it provides users with comprehensive, round-the-clock energy monitoring and management capabilities. The product features a compact design—weighing in at just 8 kg—ensuring quick and effortless installation.
SPH3.6K-24/48 3.6kW Single Phase Solar off grid inverter
- SPH3.6K-24/48 3.6kW Single Phase Solar off grid inverter is a medium-power off-grid inverter that strikes an optimal balance between power output and ease of installation. With a rated capacity upgraded to 3.6 kW and a surge capability reaching 5400 VA, it is ideally suited for off-grid residential applications with demanding power load requirements. This model not only delivers pure sine wave power but also features exceptional thermal management and robust safety mechanisms, including protection against overheating and overloading.
- Through its HMI interface—featuring a combined LED and LCD display—users can intuitively access daily and cumulative PV generation data, enabling precise monitoring and control of energy output.
- The device demonstrates outstanding PV performance, incorporating a built-in 100A charge controller that supports the connection of PV arrays up to 3600 W. Its peak efficiency reaches 96.5% in PV-to-AC conversion mode.
- Consistent with other products in the series, the SPH3.6K-24/48 supports optional WiFi/4G remote monitoring, allowing users to conveniently check the system's operational status at any time via a mobile phone or computer.
- In terms of physical design, the unit features a compact, wall-mounted form factor with dimensions of 363 × 105 × 300 mm and a weight of approximately 8.4 kg. This design not only conserves installation space but also ensures long-term reliable operation in dusty environments, thanks to its IP43 protection rating.
- Backed by the rigorous quality control standards at Anyu Technology's 47,000-square-meter intelligent manufacturing facility in Jiaxing, Zhejiang, this product offers exceptional value for money and durability.