SPH3K-24/48-SP 3.0kW Split-Phase olar off grid inverter
- The SPH3K-24/48-SP is a multifunctional off-grid inverter designed by APsolway specifically for 120/240V±5% split-phase power systems. This device supports not only 120Vac single-phase output but also 240Vac split-phase output, perfectly meeting the power requirements of North America and other regions utilizing split-phase grids. With a rated output power of 3.0kW and a peak power capacity of 4.5kVA, it generates high-quality pure sine wave electricity, thereby protecting various sensitive electronic devices from interference.
- In terms of energy harvesting and management, this model demonstrates exceptional flexibility. It features a built-in MPPT controller with 99% efficiency, supporting a maximum PV array input of 3600W and operating within an MPPT voltage range of 70–280Vdc. A key advantage of the SPH3K-24/48-SP is its battery-free operation mode; even without an installed battery, the system can directly utilize PV energy to power connected loads. The device is compatible with both 24V and 48V battery systems—supporting both lithium-ion and lead-acid batteries—and integrates a lithium battery activation function, enabling deep communication with the battery’s BMS via an RS485 interface.
Product Parameters
| MODEL | SPH3K-24/48-SP |
| PV Array | |
| Max.PV Array Power | 3600W |
| MaxPVArray Open-Circuit Voltage | 300/500VDC |
| Start-up Voltage | 60/100VDC |
| MPPT Operating Voltage Range | 70-280/120-450VDC |
| Nominal Input Voltage | 250/360VDC |
| Max. Input Current MPPT | 30/18A |
| MPPT max Efficiency | 99% |
| Battery | |
| Battery Type | Li-ion/Lead-acid |
| Nominal Battery Voltage | 24/48V |
| Battery Voltage Range | 21-29/41-58V |
| Max.AC Charging Current | 40A |
| Max.PV Charging Current | 80A |
| Max.Continuous Discharging Current | 100/80A |
| AC Input | |
| Nominal Voltage | 120Vac±5%/240Vac±5% |
| Voltage Range | 180-280Vac |
| Frequency | 50/60Hz(Auto following) |
| Max.Input Current | 40A |
| AC Output | |
| Nominal Voltage | 120Vac±5%/240Vac±5% |
| Output Voltage Waveform | Pure Sine Wave |
| Rated Output Power | 3000VA/3000W |
| Peak Output Power | 4500VA |
| Nominal Output Frequency | 50/60Hz |
| Transfer Time | 10ms |
| Efficiency (peak)PV to INV | 96.5% |
| Efficiency (peak)BAT to INV | 93.0% |
| Protection | |
| Over Temperature Protection | Yes |
| Overload Protection | 3s@≥150%load;10s@110%~150%load |
| General Data | |
| Operating Temperature Range | -10–+50℃ |
| Relative Humidity | 0~95% |
| Max.Operating Altitude | <4000m |
| Cooling Method | Intelligent Fan cooling |
| Display | LED+LCD |
| Communication with BMS | RS485 |
| Communication with Cloud | WIFI/4G |
| Degree of Protection | IP43 |
| Warranty | 2years |
| Weight(kg) | 9 |
| Dimension(W”H”Dmm) | 373*105*300 |
| Mounting Method | Wall Mounted |
Product specifications are subject to change without further notice.
RELATED PRODUCTS
AHS-3.6-SP 3.6kW Split-Phase Solar Battery Hybrid Controller
- Built to withstand tough environmental conditions, this 24V Split Phase Hybrid Inverter features a rugged design, advanced cooling, and high-quality components that ensure long-term reliability, even in demanding applications.
- Designed for split-phase power systems common in North America, it delivers both 120V and 240V AC output, making it perfect for residential homes, farms, and small commercial setups that require heavy-duty appliances like air conditioners, water pumps, and kitchen equipment. With a 24V battery input, it efficiently integrates with solar panels and energy storage systems, enabling you to generate, store, and use solar power day and night.
- Its hybrid functionality allows seamless switching between solar, battery, and grid power, reducing energy costs and providing uninterrupted backup during outages. Smart energy management ensures optimal self-consumption and reduced grid dependence.
- Whether you're living off-grid, upgrading your solar system, or preparing for emergencies, this inverter delivers stable, clean power with minimal maintenance. Easy to install and compatible with a wide range of solar and battery setups, the 24V Split Phase 120/240V Hybrid Inverter is the durable, all-in-one energy solution for today’s power needs. Power smarter, live better.
AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller
- AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller has been extensively optimized for 110V/115V/120V voltage systems, fully complying with U.S. electrical standards; it represents an ideal choice for residential energy storage and small-scale commercial applications. At its core, the unit employs DSP control and dual-loop technology to deliver a stable, pure sine wave output, thereby ensuring a high-quality power supply for sensitive loads.
- In terms of performance specifications, the AHS-5-LV demonstrates exceptional energy conversion efficiency. It features a rated output power of 5.0kW, coupled with robust peak load-bearing capabilities, allowing for an instantaneous surge power of up to 10,000VA. The device incorporates a built-in, high-efficiency MPPT charge controller capable of supporting a maximum solar PV input of 6,000W; with an MPPT efficiency reaching as high as 99.9%, it ensures maximum energy harvesting across varying lighting conditions. Regarding conversion efficiency, the peak efficiency for PV-to-inverter conversion reaches 96%, while battery-to-inverter efficiency stands at an impressive 94.5%. The unit supports 48V battery systems and offers full compatibility with both lithium-ion and lead-acid batteries, featuring a lithium battery activation function as well as BMS communication capabilities via RS485 or CAN interfaces.
- Designed to withstand harsh operating environments, the AHS-5-LV features an IP54 protection rating, effectively shielding the unit against dust and moisture to significantly enhance system reliability and service life. Its intelligent air-cooling design—combined with comprehensive protection mechanisms against short circuits, overvoltage, undervoltage, and overload—provides multiple layers of safety assurance for system operation. Furthermore, to accommodate future expansions in power demand, this model supports parallel operation of up to six units, enabling users to easily construct larger-capacity power systems.
AHS-6.3 6.3kW Solar Battery Hybrid Controller
- AHS-6.3 6.3kW Solar Battery Hybrid Controller is an intelligent hybrid power controller designed to provide modern households with efficient solutions for both off-grid and on-grid energy storage management. As the foundational model of the AHS series, it features a rated capacity of 6.3 kW and a peak output power of up to 12.6 kVA, enabling it to effortlessly handle household appliances with high startup current requirements. The device employs advanced DSP control and dual-loop technology to deliver a pure sine wave output, thereby ensuring the electrical safety of sensitive electronic equipment.
- Regarding PV integration, the AHS-6.3 is equipped with a high-performance MPPT controller that supports a maximum PV input power of 6500 W, boasting an MPPT efficiency of up to 99.9%. Its MPPT operating voltage range spans 60–450 VDC, with a maximum input current of 22 A. In terms of battery management, the unit offers seamless compatibility with both lithium-ion and lead-acid batteries; it also features a lithium battery activation function and supports BMS communication via RS485 or CAN interfaces.
- Furthermore, this model holds an IP54 protection rating and incorporates an intelligent air-cooling design, significantly enhancing its reliability and operational lifespan within challenging environments. Users can configure power supply priority modes—selecting between PV, utility grid, or battery sources—via the integrated LCD screen, and utilize a dedicated mobile app for 24-hour intelligent energy monitoring. The product weighs 12.8 kg, measures 380 × 576 × 141 mm, and is backed by a 5-year manufacturer's warranty.
APS6500 Pro-48 1.2kW Single Phase Off-Grid Inverter
- APS6500 Pro-48 1.2kW Single-Phase Off-Grid Inverter is a "Professional Edition" single-phase off-grid inverter that builds upon the standard version by significantly enhancing connectivity flexibility and system integration capabilities. While its core power performance remains identical to the standard model—boasting a rated capacity of 6.5kW and a momentary peak power of 13kVA—the "Pro" series introduces a suite of advanced, industrial-grade features.
- The most distinctive characteristic of this model is its support for "Dual AC Inputs" and "Dual AC Outputs." This functionality enables the system to connect simultaneously to both the utility grid and a generator, intelligently switching the power source for the load based on pre-configured priorities. Furthermore, it supports Meter/CT connectivity and automatic transfer switch (ATS) control for generators, thereby vastly elevating the level of automation in energy management.
- In terms of hardware configuration, the APS6500 Pro-48 features the same robust built-in 120A MPPT charge controller, supporting a maximum PV open-circuit voltage of 520V and a solar input capacity of 9000W. This ensures exceptionally high charging efficiency, even under challenging lighting conditions. The device employs DSP control and dual-loop technology to deliver a stable, pure sine wave output, achieving an exceptionally high power density relative to other products in its power class. In addition to supporting lithium battery activation and offering a comprehensive array of interfaces—including RS232, USB, and RS485—it provides real-time cloud-based monitoring services via built-in Wi-Fi. With its superior hardware-software integration capabilities and a 2-year warranty commitment, the APS6500 Pro-48 stands as a premier choice for constructing high-end off-grid microgrid systems.
SPH3K-24/48 3.0kW Single Phase Solar off grid inverter
- SPH3K-24/48 3.0kW Single Phase Solar off grid inverter features a rated output power of 3.0 kW and delivers a peak power of up to 4500 VA, enabling it to effectively support the instantaneous startup of loads in small homes or offices.
- This inverter utilizes a pure sine wave output, ensuring high-quality and stable power delivery. One of its most significant design highlights is its battery-free operation mode; it can utilize PV energy to supply power even without a connected battery, thereby greatly enhancing system flexibility.
- Regarding PV energy harvesting, the SPH3K-24/48 incorporates a high-performance built-in MPPT controller with an efficiency rating of up to 99%. It supports a maximum PV array power of up to 3600 W, with a wide PV input voltage range spanning from 70 to 280 Vdc. The device is compatible with both 24V and 48V battery systems—supporting both lithium-ion and lead-acid batteries—and integrates a lithium battery activation function as well as BMS communication capabilities via RS485.
- To withstand demanding installation environments, the unit features built-in dust-protection components, achieving an IP43 protection rating.