SPH3.6K-24/48 3.6kW Single Phase Solar off grid inverter
- SPH3.6K-24/48 3.6kW Single Phase Solar off grid inverter is a medium-power off-grid inverter that strikes an optimal balance between power output and ease of installation. With a rated capacity upgraded to 3.6 kW and a surge capability reaching 5400 VA, it is ideally suited for off-grid residential applications with demanding power load requirements. This model not only delivers pure sine wave power but also features exceptional thermal management and robust safety mechanisms, including protection against overheating and overloading.
- Through its HMI interface—featuring a combined LED and LCD display—users can intuitively access daily and cumulative PV generation data, enabling precise monitoring and control of energy output.
- The device demonstrates outstanding PV performance, incorporating a built-in 100A charge controller that supports the connection of PV arrays up to 3600 W. Its peak efficiency reaches 96.5% in PV-to-AC conversion mode.
- Consistent with other products in the series, the SPH3.6K-24/48 supports optional WiFi/4G remote monitoring, allowing users to conveniently check the system’s operational status at any time via a mobile phone or computer.
- In terms of physical design, the unit features a compact, wall-mounted form factor with dimensions of 363 × 105 × 300 mm and a weight of approximately 8.4 kg. This design not only conserves installation space but also ensures long-term reliable operation in dusty environments, thanks to its IP43 protection rating.
- Backed by the rigorous quality control standards at Anyu Technology’s 47,000-square-meter intelligent manufacturing facility in Jiaxing, Zhejiang, this product offers exceptional value for money and durability.
Product Parameters
| MODEL | SPH3.6K-24/48 | |
| PV Array | ||
| Max.PV Array Power | 4200W | |
| MaxPV Array Open-Circuit Voltage | 300VDC | |
| Start-up Votage | 60VDC | |
| MPPT Operating Voltage Range | 70-280VDC | |
| MPPT Efficiancy | 99% | |
| Nominal Input Voltage | 250VDC | |
| Max. input Current MPPT | 30A | |
| Battery | ||
| Battery Type | Li-ion/Lead-acid | |
| Nominal Battery Voltage | 24/48V | |
| Battery Voltage Range | 21-29/41-58V | |
| Max.AC Charging Current | 50A | |
| Max.PV Charging Current | 100A | |
| Max.Continuous Discharging Current | 100A | |
| AC Input | ||
| Nominal Voltage | 120Vac | |
| Voltage Range | 90-140Vac | |
| Frequency | 50/60Hz (Auto following) | |
| High Loss Frequency | 65Hz | |
| Low Loss Frequency | 45Hz | |
| Max. input Current | 40A | |
| AC Output | ||
| Nominal Voltage | 120Vac±5% | |
| Output Voltage Waveform | Pure Sine Wave | |
| Rated Output Power | 3600VA/3600W | |
| Peak Output Power | 5400VA | |
| Nominal Output Frequency | 50/60Hz | |
| Transfer Time | 10ms | |
| Max.PV to AC Efficiency | 96.5% | |
| Max.Battery to ACEfficiency | 91.0% | |
| Protection | ||
| Over Temperature Protection | Yes | |
| Overload Protection | 3s@≥150%load;10s@110%~150%load | |
| General Data | ||
| Operating Temperature Range | -10–+50℃ | |
| Safety Certification | CE | |
| Relative Humidity | 0~95%Relative Humidity(Non-condensing) | |
| Max.Operating Altitude | <4000m | |
| Cooling Method | Intelligent Fan cooling | |
| Display | LED+LCD | |
| Degree of Protection | IP43 | |
| Warranty | 2 years | |
| Weight(kg) | 6.5 | 8.4 |
| Dimension(W*H*Dmm) | 326*275*95 | 363*105*300 |
| Mounting Method | Wall Mounted | |
Product specifications are subject to change without further notice.
RELATED PRODUCTS
AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller
- AHS-5-LV 5.0kW US-standard Solar Battery Hybrid Controller has been extensively optimized for 110V/115V/120V voltage systems, fully complying with U.S. electrical standards; it represents an ideal choice for residential energy storage and small-scale commercial applications. At its core, the unit employs DSP control and dual-loop technology to deliver a stable, pure sine wave output, thereby ensuring a high-quality power supply for sensitive loads.
- In terms of performance specifications, the AHS-5-LV demonstrates exceptional energy conversion efficiency. It features a rated output power of 5.0kW, coupled with robust peak load-bearing capabilities, allowing for an instantaneous surge power of up to 10,000VA. The device incorporates a built-in, high-efficiency MPPT charge controller capable of supporting a maximum solar PV input of 6,000W; with an MPPT efficiency reaching as high as 99.9%, it ensures maximum energy harvesting across varying lighting conditions. Regarding conversion efficiency, the peak efficiency for PV-to-inverter conversion reaches 96%, while battery-to-inverter efficiency stands at an impressive 94.5%. The unit supports 48V battery systems and offers full compatibility with both lithium-ion and lead-acid batteries, featuring a lithium battery activation function as well as BMS communication capabilities via RS485 or CAN interfaces.
- Designed to withstand harsh operating environments, the AHS-5-LV features an IP54 protection rating, effectively shielding the unit against dust and moisture to significantly enhance system reliability and service life. Its intelligent air-cooling design—combined with comprehensive protection mechanisms against short circuits, overvoltage, undervoltage, and overload—provides multiple layers of safety assurance for system operation. Furthermore, to accommodate future expansions in power demand, this model supports parallel operation of up to six units, enabling users to easily construct larger-capacity power systems.
APS6500-48 6.5kW Single Phase Off-Grid Inverter
- APS6500-48 6.5kW Single-Phase Off-Grid Inverter features a rated output power of 6.5kW and a peak surge capacity of up to 13kVA, enabling it to reliably drive highly inductive loads such as air conditioners, large refrigerators, and power tools. Utilizing a pure sine wave output, it supports 208/220/230/240V voltage systems, ensuring high-quality and compatible power delivery. Designed as a 48V system solution, it achieves a peak efficiency of 93% in battery mode, effectively minimizing energy losses during the conversion process.
- In terms of solar energy utilization, the APS6500-48 delivers exceptional performance. It features a built-in 120A MPPT solar charge controller, supporting a maximum PV input power of 9000W. Its wide MPPT operating voltage range (60–450V) and a maximum input current of up to 28A allow it to be compatible with the majority of high-power solar panels currently available on the market. This model offers full compatibility with both lithium-ion and lead-acid batteries, featuring a lithium battery activation function and the capability to communicate with the battery's BMS via RS485. Furthermore, the device supports dual AC outputs and grid-tie functionality (Feed-in to Grid); combined with its built-in Wi-Fi monitoring module, users can achieve intelligent, round-the-clock energy management.