SPH3K-24/48 3.0kW Single Phase Solar off grid inverter
- SPH3K-24/48 3.0kW Single Phase Solar off grid inverter features a rated output power of 3.0 kW and delivers a peak power of up to 4500 VA, enabling it to effectively support the instantaneous startup of loads in small homes or offices.
- This inverter utilizes a pure sine wave output, ensuring high-quality and stable power delivery. One of its most significant design highlights is its battery-free operation mode; it can utilize PV energy to supply power even without a connected battery, thereby greatly enhancing system flexibility.
- Regarding PV energy harvesting, the SPH3K-24/48 incorporates a high-performance built-in MPPT controller with an efficiency rating of up to 99%. It supports a maximum PV array power of up to 3600 W, with a wide PV input voltage range spanning from 70 to 280 Vdc. The device is compatible with both 24V and 48V battery systems—supporting both lithium-ion and lead-acid batteries—and integrates a lithium battery activation function as well as BMS communication capabilities via RS485.
- To withstand demanding installation environments, the unit features built-in dust-protection components, achieving an IP43 protection rating.
Product Parameters
| MODEL | SPH3K-24/48 |
| PV Array | |
| Max.PV Array Power | 3600W |
| MaxPV Array Open-Circuit Voltage | 300VDC |
| Start-up Votage | 60VDC |
| MPPT Operating Voltage Range | 70-280VDC |
| MPPT Efficiancy | 99% |
| Nominal Input Voltage | 250VDC |
| Max. input Current MPPT | 30A |
| Battery | |
| Battery Type | Li-ion/Lead-acid |
| Nominal Battery Voltage | 24/48V |
| Battery Voltage Range | 21-29/41-58V |
| Max.AC Charging Current | 40A |
| Max.PV Charging Current | 80A |
| Max.Continuous Discharging Current | 100A |
| AC Input | |
| Nominal Voltage | 120Vac |
| Voltage Range | 90-140Vac |
| Frequency | 50/60Hz (Auto following) |
| High Loss Frequency | 65Hz |
| Low Loss Frequency | 45Hz |
| Max. input Current | 40A |
| AC Output | |
| Nominal Voltage | 120Vac±5% |
| Output Voltage Waveform | Pure Sine Wave |
| Rated Output Power | 300OVA/3000W |
| Peak Output Power | 4500VA |
| Nominal Output Frequency | 50/60Hz |
| Transfer Time | 10ms |
| Max.PV to AC Efficiency | 96.5% |
| Max.Battery to ACEfficiency | 91.0% |
| Protection | |
| Over Temperature Protection | Yes |
| Overload Protection | 3s@≥150%load;10s@110%~150%load |
| General Data | |
| Operating Temperature Range | -10–+50℃ |
| Safety Certification | CE |
| Relative Humidity | 0~95%Relative Humidity(Non-condensing) |
| Max.Operating Altitude | <4000m |
| Cooling Method | Intelligent Fan cooling |
| Display | LED+LCD |
| Degree of Protection | IP43 |
| Warranty | 2 years |
| Weight(kg) | 6.5 |
| Dimension(W*H*Dmm) | 326*275*95 |
| Mounting Method | Wall Mounted |
Product specifications are subject to change without further notice.
RELATED PRODUCTS
AHS-6.3 6.3kW Solar Battery Hybrid Controller
- AHS-6.3 6.3kW Solar Battery Hybrid Controller is an intelligent hybrid power controller designed to provide modern households with efficient solutions for both off-grid and on-grid energy storage management. As the foundational model of the AHS series, it features a rated capacity of 6.3 kW and a peak output power of up to 12.6 kVA, enabling it to effortlessly handle household appliances with high startup current requirements. The device employs advanced DSP control and dual-loop technology to deliver a pure sine wave output, thereby ensuring the electrical safety of sensitive electronic equipment.
- Regarding PV integration, the AHS-6.3 is equipped with a high-performance MPPT controller that supports a maximum PV input power of 6500 W, boasting an MPPT efficiency of up to 99.9%. Its MPPT operating voltage range spans 60–450 VDC, with a maximum input current of 22 A. In terms of battery management, the unit offers seamless compatibility with both lithium-ion and lead-acid batteries; it also features a lithium battery activation function and supports BMS communication via RS485 or CAN interfaces.
- Furthermore, this model holds an IP54 protection rating and incorporates an intelligent air-cooling design, significantly enhancing its reliability and operational lifespan within challenging environments. Users can configure power supply priority modes—selecting between PV, utility grid, or battery sources—via the integrated LCD screen, and utilize a dedicated mobile app for 24-hour intelligent energy monitoring. The product weighs 12.8 kg, measures 380 × 576 × 141 mm, and is backed by a 5-year manufacturer's warranty.
APS12000-48 1.2kW Single Phase Off-Grid Inverter
- The APS12000-48 stands as the flagship model in the APS series, engineered to deliver exceptional power support for large-scale off-grid systems. Boasting an impressive rated output power of 12 kW—with a peak power capacity reaching 24 kVA—it ranks among the most powerful units currently available in the series. Utilizing advanced DSP control and dual-loop technology, it generates a pure sine wave output, thereby providing a power environment as stable as that of the utility grid for sensitive and precision equipment. Its peak efficiency in battery mode reaches 94%, significantly optimizing energy utilization.
- This model achieves a significant breakthrough in PV integration capabilities; via its dual MPPT charge controllers, it supports the connection of up to 15,000 W of solar panels, making it ideally suited for constructing large-scale off-grid power stations. The APS12000-48 also features a large 5-inch interactive display and supports dual AC outputs, allowing users to flexibly prioritize power distribution between primary and secondary loads. Furthermore, the device not only includes a lithium battery activation function but also supports battery-free operation, greatly enhancing overall system flexibility.
- In terms of physical specifications, the unit measures 480 × 410 × 120 mm and weighs 14.5 kg, maintaining an excellent power density relative to other products in its power class. Combined with built-in Wi-Fi monitoring, grid-tie feedback technology, and an IP43 protection rating, the APS12000-48 offers a premier solution for users seeking high-capacity, highly reliable green energy systems.
EZOG IP67 Single-phase Hybrid Microinverter for Storage
- EZOG is a single-phase hybrid energy storage micro-inverter, specifically designed for 220V, 230V, and 240V voltage systems. A key technical highlight of this product is its integrated GaN (Gallium Nitride) chip, which enables it to support continuous fast charging at 40A, thereby significantly enhancing energy processing efficiency. Featuring a fanless design, the EZOG ensures ultra-quiet operation; combined with its system-wide IP67 protection rating, it is suitable for installation in a wide range of harsh outdoor environments—including AC-coupled applications for balcony-based micro-inverter systems.
- In terms of performance specifications, the EZOG boasts a rated output power of 1200VA, with a peak output power reaching 1800VA within 10 seconds, ensuring excellent adaptability to load fluctuations. The PV input terminal is recommended for connection with modules ranging from 430Wp to 900Wp+, operating within an MPPT voltage range of 12V to 48V. The inverter supports 51.2V low-voltage battery inputs, featuring a maximum charging current of 40A and a peak discharge efficiency of up to 95.5%. Furthermore, the EZOG integrates a 24-hour intelligent energy management system, allowing users to utilize the built-in Wi-Fi and Bluetooth capabilities—via the AP EasyPower App—for convenient remote operation, maintenance, and real-time monitoring. With its compact dimensions and a weight of just 8kg, backed by a 5-year manufacturer's warranty, the EZOG represents an ideal choice for building intelligent, miniaturized home energy storage systems.
HCC04-SM-0060H-YP High Efficiency Single Phase Hybrid Inverter
- 1. Colorful touch LCD, IP66 protection degree, 6 time periods for battery charging/discharging.
- 2. Max.16 pcs parallel for on-grid and off-grid operation, Support mutiple batteries parallel.
- 3. Support storing energy from diesel generator, Ac coupling to retrofit existing solar system.
- Single-phase output, suitable for household electricity use.
- Provides stable single-phase power output, ideal for homes, villas, small offices, etc.
- Can directly replace traditional grid power, enabling seamless integration of household solar power generation and energy storage systems.
TP Pro Series High-Efficiency Three Phase Solar GTI
- The TP Pro Series High-Efficiency Three Phase Solar GTI is designed to deliver optimal performance for both residential and commercial solar systems. With cutting-edge technology and exceptional efficiency, this inverter maximizes energy conversion, ensuring that every bit of sunlight is harnessed to its full potential.
- One of the standout features of the TP Pro Series is its high conversion efficiency, allowing it to operate at peak levels even under fluctuating environmental conditions. It ensures more power generation and savings on energy bills, making it an eco-friendly and cost-effective solution.
- The inverter is also highly durable, built to withstand harsh weather conditions and offer long-lasting performance. Remote monitoring capabilities provide real-time insights into energy production, enabling users to track performance and troubleshoot remotely, ensuring peace of mind. Its three-phase capability enhances grid stability, making it ideal for larger-scale installations that require consistent, high-power output.