HCC01-SM-0080H-EP Single Phase Hybrid Inverter Max. 16 Batteries Parallel
- 1. Colorful touch LCD, lP66 protection degree, Max. 16 pcs parallel for on-grid and off-grid operation.
- 2. Ac coupling to retrofit existing solar system, support multiple batteries parallel.
- 3. Max.charging/discharging current of 190A, 6 time periods for battery charging/discharging.
- 4. Support storing energy from diesel generator.
- Easy Starting.
- Single-phase motors typically have a starting winding or capacitor starter, enabling smooth starting under single-phase power.
- Especially efficient for low-power applications, with stable starting.
Product Parameters
 |
 |
 |
| Colorful touch LCD, Ip66 protection degree | Ac coupling to retrofit existing solar system | Max. 16 pcs parallel for on-grid and off-grid operation; Support multiple batteries parallel |
 |
 |
 |
| Max. charging/discharging current of 135A | 6 time periods for battery charging/discharging | Support storing energy from diesel generator |
Certifications
Product Characteristics
Lcd Display Icons
Basic System Architecture
Data Sheet
| Model | HCC01-SM-0080H-EP |
| PV String Input Data | |
| Max.DC Input Power(W) | 10400 |
| Rated PV Input Voltage(V) | 370(125~500) |
| Start-up Voltage(V) | 125 |
| MPPT Voltage Range(V) | 150-425 |
| Full Load MPPT Voltage Range(V) | 200-425 |
| PV Input Current(A) | 20+20 |
| Max.DC Short Circuit Current(A) | 44+44 |
| No.of MPPT Trackers | 2 |
| No.of Strings per MPPT Tracker | 1+1 |
| AC Input/Output Data | |
| Rated AC Output Power(W) | 8000 |
| Max AC Output Power(W) | 8800 |
| ACInput/Output Rated Current(A) | 36.4/34.8 |
| Max.AC Input/Output Current(A) | 40/38.3 |
| Max Continuous AC Passthrough(A) | 50 |
| Peak Power (off grid) | 2times of rated power,10S |
| Power Factor | 0.8 leading -0.8lagging |
| AC Output Frequency and Voltage | 50/60Hz;220/230Vac |
| Grid Type | Single Phase |
| Total Harmonic Distortion (THDi) | <3%(of nominal power) |
| DC Current Injection | <0.5%(Rated Current) |
| Battery Input Data | |
| Battery Type | Lead-acid or Lithium-ion |
| Battery Voltage Range (V) | 40~60 |
| Max.Charging Current(A) | 190 |
| Max.Discharging Current(A) | 190 |
| External Temperature Sensor | Yes |
| Charging Curve | 3 Stages /Equalization |
| Charging Strategy for Li-lon Battery | Self-adaption to BMS |
| Efficiency | |
| Max.Efficiency | 97.60% |
| Euro Efficiency | 96.50% |
| MPPT Efficiency | 99% |
| Protection | |
| Anti-islanding Protection | Yes |
| PV String Input Reverse Polarity Protection | Yes |
| Insulation Resistor Detection | Yes |
| Residual Current Monitoring Unit | Yes |
| Output Over Current Protection | Yes |
| Output Shorted Protection | Yes |
| Surge Protection | DC Type II/AC TypeIⅢ |
| Over Voltage Category | DC Typel/AC TypeⅢ |
| Certifications and Standards | |
| Grid Regulation | IEC61727/IEC 62116,EN 50549-1 |
| Safety EMC/Standard | IEC/EN 61000-6-1/2/3/4,IEC/EN 62109-1,IEC/EN 62109-2 |
| General Data | |
| Operating Temperature Range(℃) | -40-60℃,>45℃ Derating |
| Cooling | Smart Cooling |
| Noise(dB) | ≤50 dB |
| Communication with BMS | RS485;CAN |
| Monitoring mode | WIFI, APP |
| Weight(kg) | 29 |
| Size(W×HxDmm) | 426Wx526Hx255D(Excluding connectors and brackets) |
| Protection Degree | IP66 |
| Installation Style | Wall-mounted |
| Warranty | 5Years(10Years Optional) |
RELATED PRODUCTS
AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller
- AHS-10.2 10.2kW Single Phase Solar Battery Hybrid Controller is a single-phase hybrid controller that combines high power output with intelligent functionality, designed specifically for medium-to-large residential properties with substantial energy demands. With a rated capacity elevated to 10.2 kW and an impressive peak surge capability of 20.4 kVA, it serves as the ideal core component for powering heavy-duty loads such as central air conditioning systems and water pumps. Continuing the legacy of excellence established by the AHS series, this product features an IP54-rated design, offering effective protection against dust and moisture ingress.
- In terms of energy harvesting, the AHS-10.2 demonstrates distinct performance advantages, boasting a maximum PV input power of 10,000 W. It incorporates a dual MPPT input design—with a maximum input current of 22 A per channel—significantly enhancing the system's compatibility with complex rooftop PV array configurations. Regarding battery charging performance, the device achieves a maximum charging current of up to 210 A when utilizing a combined grid and PV power source, thereby drastically reducing the recharge time for the energy storage system. Furthermore, it supports a dual AC output function, enabling users to flexibly prioritize power supply to primary and secondary loads based on the current battery voltage status.
AHS-12-SP 12kW Split-Phase Solar Battery Hybrid Controller
- AHS-12-SP 12kW Split-Phase Solar Battery Hybrid Controller delivers a premium energy management experience for large residential properties and commercial environments with high power demands. This model boasts an impressive rated output power of 12,000 VA (12 kW) and a momentary peak power capacity of up to 24,000 VA—sufficient to simultaneously power a full suite of high-end household appliances. It supports split-phase output modes (110/220 VAC or 120/240 VAC), generating high-quality pure sine wave current that provides a grid-stable power environment for sensitive electronic equipment.
- The AHS-12-SP represents a significant breakthrough in photovoltaic integration capabilities. It features a dual MPPT input design capable of accommodating up to 15,000 W of solar panels; with a maximum input current increased to 27A + 27A per channel, it is fully compatible with high-power PV modules. For large-scale energy storage applications, the unit offers a maximum charging current of 250A and supports parallel operation of up to six units, greatly enhancing system scalability and flexibility. Operating in battery mode, the device achieves a peak efficiency of 96.1%, ensuring minimal energy loss during the power conversion process.
- In terms of physical specifications, the unit measures 480 × 410 × 120 mm and weighs 14.5 kg, offering an exceptionally high power density relative to other products in its class. This model integrates comprehensive safety protection mechanisms, holds an IP54 protection rating, and supports remote intelligent monitoring and maintenance via Wi-Fi.
APS12000-48 1.2kW Single Phase Off-Grid Inverter
- The APS12000-48 stands as the flagship model in the APS series, engineered to deliver exceptional power support for large-scale off-grid systems. Boasting an impressive rated output power of 12 kW—with a peak power capacity reaching 24 kVA—it ranks among the most powerful units currently available in the series. Utilizing advanced DSP control and dual-loop technology, it generates a pure sine wave output, thereby providing a power environment as stable as that of the utility grid for sensitive and precision equipment. Its peak efficiency in battery mode reaches 94%, significantly optimizing energy utilization.
- This model achieves a significant breakthrough in PV integration capabilities; via its dual MPPT charge controllers, it supports the connection of up to 15,000 W of solar panels, making it ideally suited for constructing large-scale off-grid power stations. The APS12000-48 also features a large 5-inch interactive display and supports dual AC outputs, allowing users to flexibly prioritize power distribution between primary and secondary loads. Furthermore, the device not only includes a lithium battery activation function but also supports battery-free operation, greatly enhancing overall system flexibility.
- In terms of physical specifications, the unit measures 480 × 410 × 120 mm and weighs 14.5 kg, maintaining an excellent power density relative to other products in its power class. Combined with built-in Wi-Fi monitoring, grid-tie feedback technology, and an IP43 protection rating, the APS12000-48 offers a premier solution for users seeking high-capacity, highly reliable green energy systems.
SPH3K-24/48 3.0kW Single Phase Solar off grid inverter
- SPH3K-24/48 3.0kW Single Phase Solar off grid inverter features a rated output power of 3.0 kW and delivers a peak power of up to 4500 VA, enabling it to effectively support the instantaneous startup of loads in small homes or offices.
- This inverter utilizes a pure sine wave output, ensuring high-quality and stable power delivery. One of its most significant design highlights is its battery-free operation mode; it can utilize PV energy to supply power even without a connected battery, thereby greatly enhancing system flexibility.
- Regarding PV energy harvesting, the SPH3K-24/48 incorporates a high-performance built-in MPPT controller with an efficiency rating of up to 99%. It supports a maximum PV array power of up to 3600 W, with a wide PV input voltage range spanning from 70 to 280 Vdc. The device is compatible with both 24V and 48V battery systems—supporting both lithium-ion and lead-acid batteries—and integrates a lithium battery activation function as well as BMS communication capabilities via RS485.
- To withstand demanding installation environments, the unit features built-in dust-protection components, achieving an IP43 protection rating.